Products
HDMI HDBaseT Extender with Auxiliary Audio
HDBaseT Transmit : ( 5 play supported)
HDMI, Audio, Ethernet, RS-232, IR in-out and PoE.
- Introduction
- Features
- Specifications
-
1. HDBaseT Extend HDMI with 3D and 4Kx2K over a single UTP/STP cable up to 330ft (100M). 2. Support HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant. 3. Support link speeds of up to Video, TMDS format Max. 10.2 Gbit/s, Signal 340MHz. 4. Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels. 5. Support 1080p TV’s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS. 6. Support Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats. 7. Support DVI Auxiliary Audio (stereo audio) input and S/PDIF (PCM) output. 8. Transfer Bi-directional Infrared control signal together with the HDMI signal. 9. RS-232 port for firmware update or RS-232 control signal transmission. 10. Support HDMI CEC between your connected Source and display gear.. 11. With LED indicators to show the POWER/HDMI/HDCP/LINK status. 12. Transmits HDMI, Audio, PoE, Ethernet, RS-232 and Bi-Directional IR over single LAN cable. 13. Support Super Audio CD (DSD), CEC commands protocol table. 14. Mounting Ears and wall mount pack supplied. 15. Power supply using universal power switch 50/60Hz,100~240VAC. -
1. Type of Extender: HDBaseT Transmitter for HDMI signal over category UTP/STP Cable 2. Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp 3. HDBaseT Signal Supports: HDMI 1.4a HDMI format Standard, DVI and HDCP Compliant 4. Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 10.2 Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D 5. HDMI Audio I/O Supports: Multi Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH) 6. Extra DVI Audio input: HDBaseT Transmitter Input audio: Stereo Audio (3.5mm OD Jack) 7. S/PDIF Audio output: HDBaseT Receiver Output audio: S/PDIF(PCM-2CH, RCA connector) 8. Category Cable Support: CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable 9. Support HDMI resolutions: 480p, 720p 1080i/1080p and Ultra HD 4K2K 10. Scan Rate Accepted: Support HDMI full HD Resolution; Frequency 24Hz to 240Hz 11. Controls: 1x IR in, 1x IR out, 1x Rs232 I/O and 2x LAN series interface 12. PoE Support : HDBaseT Transmitter with 48VDC adaptor 13. Transfer distance: Up to 330ft (100 meters) 14. HDMI I/O connectors: HDMI Type A - SMD 19pin Female Type 15. HDBaseT I/O connectors: HDBaseT RJ-45, 8p8c Female socket. 16. Safety Approvals: CE, FCC, VCCI , REACH 17. Dimensions (LxWxH): 5.31" x 5.11” x 1" (135mm x 130mm x 26mm) 18. Shipping Weight (net): 0.4775 kgs / 1.05 lb 19. Power consumption : Max. 850mA (Full load 1080p-60Hz signal with use DC12V input) 20. Power Supply: Power Input +12VDC, 2A (Universal Type 50/60Hz, 100~240 VAC)