- Introduction
- Features
- Specifications
- The SB-5642LCM is high-performance 4x2 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 2.25 Gbps, enabling 1080p HDMI™ formats and UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any outputs simultaneously. The Switcher is certified and fully HDMI™ and HDCP compliant, with CE,FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors, projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via front panel push buttons, IR remote or via RS-232. A RS-232 Windows GUI interface is provided for matrix routing.
-
01. Support (4)x HDMI digital source devices Matrix switched to (2)x HDMI destinations
02. HDMI Digital video/multi-channel audio format, DVI 1.0 format and HDCP 1.3 compliant
03. Support HDMI/DVI high definition resolutions 408p, 720p, 1080i/1080p up to 36 bit, 3D formats
04. Support link speeds of up to 2.25 Gbps (link clock rate of 250 MHZ)
05. Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV
HDMI resolutions 480i/480p, 576i/576p, 720p, 1080i/p
06. Audio Supports Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD,
DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2.
07. Support IR Remote and IR Extender with distance 300M Maximum
08. Various User Interface controls :
• Windows based GUI control via RS-232 port
• Front Panel push buttons
• IR wireless remote controller
• IR External port (Switch Control)
• Third party RS-232 controller (via simple ASCII)
09. Compatible with full HD high resolution Video player device and LCD / Plasma
monitor displays or Projector
10. Direct selection and confirm via Front push buttons with LED readout
11. Infrared : IR remote control (38KHz)
12. Support world wide eight (8) select embedded EDID modes
13. Support seven (7) control function key :
ALL / OFF / RECALL / ENTER / MEMORY / LOCK / EDID
14. Support RS-232 interface control AP driver for PC 95/98/2000/xp/7/8
A Windows-based control software Driver packaged
15. Support desktop with Ear mount and 19 inch 1U Rack mountable type panel
16. Support Lower power consumed full load under 1800 mA
17. Power supply DC12Volt, Universal Type Switch 100~240VAC, 50/60Hz
-
Type of HDMI Switcher (4)x inputs To (2)x Outputs HDMI Matrix Switcher HDMI Support HDMI Video 0.5~1Vpp, DDC5Vpp, HDMI V1.4a, 3D formats HDCP / CEC Support HDCP 1.3 Compliant, CEC Compliant Video Bandwidth Double Data Rates: 250Mhz, Total 2.25Gbps bandwidth Digital Video Support HD:480i/480p/720p/1080i/p up to 36bit deep color Input (4)x HDMI (HDMI or DVI digital source) Output (2)x HDMI (To 2x Destinations) Switch Controls 1x Select & Function buttons on front panel
(Data status via LED panel readout)
1x IR Remote Controller (switch control)
1x IR External port (switch control via 3.5mm OD Jack)
1x RS-232 series interface (switch control)Source Status Input status LEDs indicates presence of a live signal (13) Function Control Keys 1.ALL, 2.OFF, 3.RECALL, 4.ENTER, 5.MEMORY,
6.LOCK, 7.EDID, 8.Destination button (1) thru (2),
9.Source button (1) thru (4)Infrared Frequency 38 Khz IR External Distance ~984 feet / 300 meters maximum HDMI I/O Connector HDMI Type A - SMD 19pin Female Type Temperature Operating Temperature 32°F - 100°F (0°C - 32°C) Dimension (WxDxH) 19" x 7.87" x 1.73" (482mm x 200mm x 44mm) Rack Mount 1RU High 19 "Rack Mount #1U-440L (with rack mount) Power Supply DC12V, 3A, Powr Input : AC 100~240 VAC 50/60Hz
(universal Type Supply)Safety Approvals CE, FCC, REACH Weight 1.85 Kg / 4.07 lb