Products
SB-6334T5 / SB-6334R5
DVI HDBaseT Extender (PoH)
DVI HDBaseT Extender (PoH)
| SB-6334T5 |
| DVI HDBaseT Transmitter (PoH) |
| Input : 1x DVI |
| Output : 1x HDBaseT (PoH) |
| Controls : IR (in/out), RS-232, LAN |
| SB-6334R5 |
| DVI HDBaseT Receiver (PoH) |
| Input : 1x HDBaseT (PoH) |
| Output : 1x DVI |
| Controls : IR (in/out), RS-232, LAN |
- Introduction
- Features
- Specifications
-
-
1. DVI-HDBaseT Extend with 3D and HDMI 4Kx2K over a single UTP/STP cable up to 330ft (100M) 2. Support DVI WUXGA 1920x1200@60 video and Ultra HD 4K2K video, HDCP 2.0 compliant 3. Support link speeds of up to Video Max. 8.16 Gbit/s, Signal 340MHz, TMDS format 4. Support HDMI Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels 5. Support 1080p TV’s at 24/30/60/100/120 Hz and above as well as Blu-rays at 24 FPS 6. Support Digital Audio PCM-2CH Digital audio formats 7. HDBaseT Transfer Bi-directional Infrared control signal together with the HDMI signal 8. RS-232 port for firmware update or RS-232 control signal transmission 9. Support DVI CEC between your connected Source and display gear 10. With LED indicators to show the POWER/PoH/HDCP/LINK status 11. 5-Play Transmits DVI, Audio, PoE, Ethernet, RS-232 and Bi-Directional 12. Support Super Audio CD (DSD), CEC commands protocol table 13. Mounting Ears and wall mount pack supplied 14. Power supply using universal power switch 50/60Hz,100~240VAC -
Type of Extender HDBaseT Transmitter for DVI signal over category UTP/STP Cable Input Signals DVI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp HDBaseT Signal Supports For DVI format Standard, Video TMDS and HDCP Compliant Video Support HDMI and DVI TMDS format for 1920x1200 resolution up to 8.16 Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D HDMI Audio I/O Supports PCM-2CH Category Cable Support CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable Support DVI resolutions Up to WUXGA 1920x1200 @ 60Hz and Ultra HD 4K2K Scan Rate Accepted Support HDMI full HD Resolution; Frequency 24Hz to 120Hz Controls 1x IR in, 1x IR out, 1x RS-232 I/O and 2x LAN series interface PoE Support HDBaseT Transmitter with 48VDC adaptor Transfer distance Up to 330ft (100 meters) DVI I/O connectors DVI-D - (24+5) pin Female DIP Type (without Audio) HDBaseT I/O connectors HDBaseT RJ-45, 8p8c Female socket Safety Approvals CE, FCC, VCCI & REACH Dimension (WxDxH) 5.31" x 5.11" x 1" (135mm x 130mm x 26mm) Weight 0.4235 kg / 0.9317 lb Power consumption Max. 9015mA
(Full load 1920x1200-60Hz with use DC12V input)Power Supply Power Input +12VDC, 2A
(Universal Type 50/60Hz, 100~240 VAC)