Products
SB-6320T4 / SB-6320R4
HDMI HDBaseT Extender with Auxiliary Audio
HDMI HDBaseT Extender with Auxiliary Audio
HDBaseT Transmit : |
HDMI, Audio, Ethernet, RS-232 and IR in-out. |
- Introduction
- Features
- Specifications
-
1. HDBaseT Extend HDMI with 3D and 4Kx2K over a single UTP/STP cable up to 330ft (100M). 2. Support HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant. 3. Support link speeds of up to Video, TMDS format Max. 10.2 Gbit/s, Signal 340MHz. 4. Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels. 5. Support 1080p TV’s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS. 6. Support Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats. 7. Transfer Bi-directional Infrared control signal together with the HDMI signal. 8. Support DVI Auxiliary Audio (stereo audio) input and S/PDIF (PCM) output. 9. RS-232 port for firmware update or RS-232 control signal transmission. 10. Support HDMI CEC between your connected Source and display gear.. 11. With LED indicators to show the POWER/HDMI/HDCP/LINK status. 12. Transmits HDMI video & audio, Ethernet, RS-232 and Bi-Directional IR. 13. Support Super Audio CD (DSD), CEC commands protocol table. 14. Mounting Ears and wall mount pack supplied. 15. Power supply using universal power switch 50/60Hz,100~240VAC. -
1. Type of Extender: HDBaseT Transmitter for HDMI signal over category UTP/STP Cable. 2. Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp 3. HDBaseT Signal Supports: HDMI 1.4a HDMI format Standard, DVI and HDCP Compliant 4. Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 10.2 Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D. 5. HDMI Audio I/O Supports: Multi Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH) 6. Extra DVI Audio input: HDBaseT Transmitter Input audio: Stereo Audio (3.5mm OD Jack). 7. S/PDIF Audio output: HDBaseT Receiver Output audio: S/PDIF(PCM-2CH, RCA connector). 8. Category Cable Support: CAT5e, CAT6, CAT6a, CAT7 UTP/STP category Lan cable. 9. Support HDMI resolutions: 480p, 720p 1080i/1080p and Ultra HD 4K2K. 10. Scan Rate Accepted: Support HDMI full HD Resolution; Frequency 24Hz to 240Hz. 11. Controls: 1x IR in, 1x IR out, 1x Rs232 I/O and 2x LAN series interface. 12. PoE Support : (optional) 13. Transfer distance: Up to 330ft (100 meters). 14. HDMI I/O connectors: HDMI Type A - SMD 19pin Female Type 15. HDBaseT I/O connectors: HDBaseT RJ-45, 8p8c Female socket. 16. Safety Approvals: CE, FCC, VCCI & REACH 17. Dimensions (LxWxH): 5.31" x 5.11” x 1" (135mm x 130mm x 26mm) 18. Shipping Weight (net): 0.4675 kgs / 1.0285 lb 19. Power consumption : Max. 850mA (Full load 1080p-60Hz signal with use DC12V input) 20. Power Supply: Power Input +12VDC, 2A (Universal Type 50/60Hz, 100~240 VAC).