Products
DVI HDBaseT 100M Extender with PoE
| HDBaseT Transfer : (5-Play supported) |
| DVI, Ethernet, RS-232, IR in-out and PoE.. |
- 產品介紹
- 產品特色
- 產品規格
-
-
1. DVI-HDBaseT Extend with 3D and HDMI 4Kx2K over a single UTP/STP cable up to 330ft (100M). 2. Support DVI WUXGA 1920x1200@60 video and Ultra HD 4K2K video, HDCP 2.0 compliant. 3. Support link speeds of up to Video Max. 8.16 Gbit/s, Signal 340MHz, TMDS format. 4. Support HDMI Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels. 5. Support 1080p TV’s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS. 6. Support Digital Audio PCM-2CH Digital audio formats. 7. HDBaseT Transfer Bi-directional Infrared control signal together with the HDMI signal. 8. RS-232 port for firmware update or RS-232 control signal transmission. 9. Support DVI CEC between your connected Source and display gear.. 10. With LED indicators to show the POWER/DVI/HDCP/LINK status. 11. 5-Play Transmits DVI, Audio, PoE, Ethernet, RS-232 and Bi-Directional. 12. Support Super Audio CD (DSD), CEC commands protocol table. 13. Mounting Ears and wall mount pack supplied. 14. Power supply using universal power switch 50/60Hz,100~240VAC. -
1. Type of Extender: HDBaseT Transmitter for DVI signal over category UTP/STP Cable. 2. Input Signals: DVI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp 3. HDBaseT Signal Supports: For DVI format Standard, Video TMDS and HDCP Compliant 4. Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 8.16 Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D. 5. HDMI Audio I/O Supports: PCM-2CH 6. Category Cable Support: CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable. 7. Support DVI resolutions: Up to WUXGA 1920x1200 @ 60Hz and Ultra HD 4K2K. 8. Scan Rate Accepted: Support HDMI full HD Resolution; Frequency 24Hz to 240Hz. 9. Controls: 1x IR in, 1x IR out, 1x Rs232 I/O and 2x LAN series interface. 10. PoE Support : HDBaseT Transmitter with 48VDC adaptor. 11. Transfer distance: Up to 330ft (100 meters). 12. DVI I/O connectors: DVI-D - (24+5) pin Female DIP Type (without Audio) 13. HDBaseT I/O connectors: HDBaseT RJ-45, 8p8c Female socket. 14. Safety Approvals: CE, FCC, VCCI & REACH 15. Dimensions (LWH): 5.31" x 5.11” x 1" (135mm x 130mm x 26mm) 16. Shipping Weight (net): 0.4235 kgs / 0.9317 lb 17. Power consumption : Max. 9015mA. (Full load 1920x1200-60Hz with use DC12V input) 18. Power Supply: Power Input +12VDC, 2A (Universal Type 50/60Hz, 100~240 VAC).